Chimney Supplies SS Pipe & Accessories

• 24 ga. stainless steel 316L rigid stovepipe or liner
• Size range: 4” x 24” to 8” x 48”
• 24 ga. stainless steel. adj. ELL 316 size range: 4” to 8”
• 24 ga. stainless steel. adj. ELL 304 size range: 6” to 8”
• 316 removable nose tees size range: 5” to 8”
• 316 stainless steel solid tees size range: 5” to 8”
• 304 stainless steel solid tees size range: 6” to 8”
  

• Additional black pipe items are available (not listed)
• 24 ga. black pipe sizes range from 4” x 12” to 8” x 48”
• Black slip joint sizes range from 6” to 8”
• 32” – 60” telescopic pipe sizes range from 6” to 8”
• 24 ga. 90ºF black adj. ELL sizes range from 4” to 8”
• 24 ga. 90ºF black. corr. ELL sizes range from 6” to 8”
• 24 ga. 45ºF black ELL sizes range from 5” to 8”
• Black tee cap – no crimp sizes range from 4” to 8”
• 24 ga. black tee sizes range from 4” x 4”x 4” to 8” x 8” x 8”
  

• Horizontal termination kit “B”
• One 90˚F elbow
• One wall thimble
• One horizontal termination
• One appliance adapter
• One 24” pipe
• One adjustable length pipe (4–10”)
  

When your chimney goes up through a ceiling, then through the roof, choose the Model SPR Decorator Ceiling Support Installation Kit – SPR*CSK.

Note: For a 2-story application, purchase the Ceiling Support Installation Kit and install an additional Firestop Radiation Shield. Then all you need is roof flashing, chimney lengths and locking bands.

When your chimney goes out a cathedral or open beam ceiling, choose the Model SPR cathedral ceiling support installation kit – SPR*CCSK.

Now you just need your roof flashing, chimney lengths and locking bands.

When your chimney goes out a wall and then runs straight up, you’ll need the Model SPR Wall Support Installation Kit – SPR*WSK.

Now all you need are vertical chimney lengths, through the wall length (must extend at least 3” into the room), 12” chimney length or insulated tee plug (installed below the stainless steel tee) and locking bands.

Strong, durable galvanized steel outer pipe has internal spacing beads to ensure a uniform insulating air space between pipe walls. Each end is die-formed to ensure uniform sizing for strong, easy-to-connect joints, which resist wasteful handling and shipping damage.

The inner aluminum pipe is attached to the outer pipe at only one end. This arrangement allows for differential expansion between the two pipes, eliminating operational noises.

Modern wood-burning stoves and fireplaces are designed to provide maximum heating efficiency while producing a minimum of pollution. The chimney can have a major effect on how well these appliances perform under real-world conditions. Chimtek combines quality materials and advanced technology to create America’s safest and most efficient liner for masonry chimneys. The double lining concept is an important part of Chimtek’s outstanding performance and quality heating solutions!

• Mfg. with .010 thickness 316 stainless steel
• No memory
• Lightweight and rugged
• No 20% drag factor
• Crossover Kits range in size from 6” x 20” to 8” x 35”
  

Insulation-to-Insulation Contact: Creates a continuous column of protection, which eliminates cold air infiltration at every chimney joint. Significantly reduces the formation of creosote and therefore the potential for chimney fires.

304 Stainless Steel Construction: Used for both the inner liner and outer casing for superior resistance to corrosion. 316 SS inner liner is available.

Solid-Pack Insulation: Provides maximum safety and performance. UltimateONE chimneys contain one full inch of insulation for superior insulating value and fire protection. UltimateONE’s unique solid-pack design helps keep flue temperatures high (performance) and outer temperatures low (safety).